Forge 3G Toggle | Black
Forge 3G Toggle Wall Plate In Black
Description
Bold and understated, the black finish delivers a clean, modern edge. Designed to ground a space with a refined, architectural look. Each plate comes with matching Black screws, plus a set of Gold screws.
Size & Fit
- Midsize
- 6.94" W x 5" H
- Gang
- 3G
- Type
- Toggle
For The Best Fit: Measure your existing wall plate before ordering. If you're unsure, choose Midsize for added coverage and a more forgiving fit.
Finish & Materials
- Color
- Black
- Finish
- Powder Coated
- Material
- Heavy Metal
- Mounting Hardware
- Included (color-matched screws)
- Installation
- Easy surface mount with standard tools
Forge 3G Toggle | Black
Forge Collection
The Beauty Of Less
We were inspired by Forge's honesty: a smooth, flat plate with nothing added, letting the finish do the talking. It disappears into a calm, minimal room and gives a pared-back space a finished, intentional look. In Brushed Gold it sits easily beside warm woods, linen and natural stone.
Find Your Fit
The exact size of this plate, how Midsize and Standard compare, and how to measure.
This plate
- Collection
- Forge
- Gang
- 3-Gang
- Type
- Toggle
Outside size of the plate, width × height.
Midsize or Standard?
This design comes in Midsize (6.94" W × 5" H), a little larger on every side than a Standard 3-gang plate (about 6.33" W × 4.5" H). The extra coverage hides paint lines, wallpaper edges and the outline of an old plate. Standard is the classic size that matches most builder plates.
How to measure
- Measure the outside edges of your current plate, width first, then height.
- Compare with the size above.
- Check for door trim, cabinets or a backsplash edge close by, since Midsize needs a little more room.
If your old plate hides paint lines or wallpaper edges, or you're not sure, choose Midsize. Our plates fit standard U.S. switches, outlets and electrical boxes.
Questions About This Plate
This is a 3-gang toggle plate. It fits three classic flip switches side by side.
Size: 6.94" W x 5" H (outside, width × height)
For how to measure and how Midsize compares with Standard, see Find Your Fit above, or email a photo of your current plate to contact@riosalto.com.
The toggle opening fits classic flip-up, flip-down switches, and most rotary (knob) dimmers are built to fit a toggle plate. GFCI outlets, paddle dimmers and most smart switches use the larger rocker opening, so they need a rocker plate.
If you're not sure, compare the opening on your current plate, or send us a photo at contact@riosalto.com.
Yes. This plate comes with Black screws to match, plus a set of Gold screws if you'd like a two-tone look.
If any are missing from your order, email contact@riosalto.com with your order number and we'll help.
- Turn off power to the switch or outlet at the breaker.
- Remove the screws and the old plate.
- Check that the switch or outlet sits straight and level with the wall.
- Hold the new plate in place and start each screw by hand.
- Tighten until snug. Don't overtighten.
- Turn the power back on.
It usually takes a few minutes and a screwdriver, with no rewiring. A hand screwdriver gives you more control than a drill and helps protect the finish.
Black is a deep black that adds contrast and definition.
Forge plates are made of heavy metal, with a solid, substantial feel.
Plates with the same finish name are made to coordinate. Because of how metal finishes are applied, slight variations in color or texture can occur, and these aren't defects. Other brands' "gold" or "nickel" can differ quite a bit, so if you're matching existing hardware, compare our photos in your own lighting or ask us. Screens show color differently, too.
The Forge design also comes in Brushed Gold and Warm Ivory. See the full Forge Collection.
Shipping is free. Orders are fulfilled through Amazon and ship free with Prime. Delivery timing follows Amazon's estimates, and your tracking email shows your order's progress once it ships.
Wipe the plate with a soft, dry or slightly damp cloth. For anything sticky, use a drop of mild soap and water, then dry. Spray cleaners onto the cloth, never onto the plate, and avoid abrasive pads, bleach, ammonia and metal polishes, which can wear the finish.
Our FAQ covers sizing, installation, finishes and ordering in more detail. Or email contact@riosalto.com. A photo of your current plate and its measurements helps us answer quickly.
Spotted At Home
How our customers style Rio Salto, from powder rooms to hallways.
Discover why hundreds of Amazon customers rate us five stars.
