Heritage 3G Rocker | Brushed Gold
Heritage 3G Rocker Wall Plate In Brushed Gold
Description
The Heritage Collection features classic architectural detailing with layered borders and refined lines for a timeless look. Crafted from solid metal and finished in warm Brushed Gold, each plate adds depth, elegance, and a substantial feel to everyday switches and outlets. Each plate comes with matching Brushed Gold screws.
Size & Fit
- Midsize
- 6.94" W x 5" H
- Gang
- 3G
- Type
- Rocker
For The Best Fit: Measure your existing wall plate before ordering. If you're unsure, choose Midsize for added coverage and a more forgiving fit.
Finish & Materials
- Color
- Brushed Gold
- Finish
- Brushed
- Material
- Heavy Metal
- Mounting Hardware
- Included (color-matched screws)
- Installation
- Easy surface mount with standard tools
Heritage 3G Rocker | Brushed Gold
Heritage Collection
A Classic Raised Panel
Heritage was inspired by traditional paneled doors, with a raised inner panel and gracefully shaped corners. It brings a timeless, tailored finish to living rooms and entryways. In Brushed Gold it pairs well with warm wood, framed art and soft traditional upholstery.
Find Your Fit
The exact size of this plate, how Midsize and Standard compare, and how to measure.
This plate
- Collection
- Heritage
- Gang
- 3-Gang
- Type
- Rocker
Outside size of the plate, width × height.
Midsize or Standard?
This design comes in Midsize (6.94" W × 5" H), a little larger on every side than a Standard 3-gang plate (about 6.33" W × 4.5" H). The extra coverage hides paint lines, wallpaper edges and the outline of an old plate. Standard is the classic size that matches most builder plates.
How to measure
- Measure the outside edges of your current plate, width first, then height.
- Compare with the size above.
- Check for door trim, cabinets or a backsplash edge close by, since Midsize needs a little more room.
If your old plate hides paint lines or wallpaper edges, or you're not sure, choose Midsize. Our plates fit standard U.S. switches, outlets and electrical boxes.
Questions About This Plate
This is a 3-gang rocker plate. It fits three rocker switches side by side.
Size: 6.94" W x 5" H (outside, width × height)
For how to measure and how Midsize compares with Standard, see Find Your Fit above, or email a photo of your current plate to contact@riosalto.com.
Usually, yes. The rocker opening on this plate is the rectangular rocker opening shared by GFCI outlets (the ones with Test and Reset buttons), paddle, slide and touch dimmers, most smart switches, and rocker-style USB outlets.
If you're not sure, compare the opening on your current plate, or send us a photo at contact@riosalto.com.
Yes. Every plate comes with color-matched mounting screws.
If any are missing from your order, email contact@riosalto.com with your order number and we'll help.
- Turn off power to the switch or outlet at the breaker.
- Remove the screws and the old plate.
- Check that the switch or outlet sits straight and level with the wall.
- Hold the new plate in place and start each screw by hand.
- Tighten until snug. Don't overtighten.
- Turn the power back on.
It usually takes a few minutes and a screwdriver, with no rewiring. A hand screwdriver gives you more control than a drill and helps protect the finish.
Brushed Gold is a warm brushed finish with a soft, refined glow.
Heritage plates are made of heavy metal, with a solid, substantial feel.
Plates with the same finish name are made to coordinate. Because of how metal finishes are applied, slight variations in color or texture can occur, and these aren't defects. Other brands' "gold" or "nickel" can differ quite a bit, so if you're matching existing hardware, compare our photos in your own lighting or ask us. Screens show color differently, too.
See the full Heritage Collection for every configuration in this finish.
Shipping is free. Orders are fulfilled through Amazon and ship free with Prime. Delivery timing follows Amazon's estimates, and your tracking email shows your order's progress once it ships.
Wipe the plate with a soft, dry or slightly damp cloth. For anything sticky, use a drop of mild soap and water, then dry. Spray cleaners onto the cloth, never onto the plate, and avoid abrasive pads, bleach, ammonia and metal polishes, which can wear the finish.
Our FAQ covers sizing, installation, finishes and ordering in more detail. Or email contact@riosalto.com. A photo of your current plate and its measurements helps us answer quickly.
Spotted At Home
How our customers style Rio Salto, from powder rooms to hallways.
Discover why hundreds of Amazon customers rate us five stars.
