Barn Door Hardware Kit | Single Door | Gold
Hardware only. Door not included. Doors in photos are shown for styling.
Dark Gold: Bright, sunlit gold with a polished, classic glow. Compare finishes in photo 03.
Light Gold: A softer, champagne-toned gold. Compare finishes in photo 05.
Will This Work With My Door?
- Configuration
- Single door, single track. Bypass (two doors that slide past each other) is a different kit.
- Door Thickness
- 1 3/8" or 1 3/4"
- Material
- Solid, heavyweight metal, never hollow. Brushed gold finish.
- Track
- Ships in 4 sections that join seamlessly with the included connector screws, for a smooth, secure glide.Ships in sections that join seamlessly with the included connector screws, for a smooth, secure glide.
- Max Door Weight
- 220 lb
- Door Width
- Fits doors up to 40" wide on the 6ft 7in trackSee the size guide.
- Trim And Molding
- If your doorway has trim, mount the track on a header board as thick as the trim.
What Track Length Do I Need?
Measure your door opening. Your door should be a little wider than the opening so it covers it, and the track is usually about twice the door width so the door can slide fully clear. Make sure you have that much open wall beside the opening.
This kit: 6ft 7in (78.75") track, for doors up to 40" wide. The door is about half the track length. Other single sizes run 5ft to 9ft. Not every size comes in both finishes.
See image 03 and How To Measure.
What's Included?
Track Kit Only: solid metal track (4 track sectionstrack sections + connector screws), rollers and all mounting hardware for one door on one track, plus step-by-step instructions. No handle or floor guide.
Track Kit + Handle & Floor Guide: everything in Track Kit Only, plus:
- 12" x 1" pull handle bar
- 8.5" x 2.3" flush finger pull
- 2 matching gold screws, 2 3/8"
- 2 protective round pads, 1 3/4"
- 1 wrench
- 1 adjustable floor guide: mounts to the wall, 8 assembly options, no groove in the door and no drilling into the floor
Hardware only. The door is not included.
How Much Clearance Do I Need?
- Above The Opening
- At least 5" between the ceiling and the top of the rail
Can I Install It Myself?
Yes, it is designed for DIY. Step-by-step instructions and all mounting hardware are included. For indoor use only. The floor guide mounts to the wall, so there is no groove to cut in the door and no drilling into the floor.
- Studs Or Drywall
- Screw the track into wall studs.
- Header Board
- Use a header board if the track holes don't line up with your studs or if your doorway has trim. Match the board to the trim thickness and screw it into the studs.
Step 1
Pick Your Rail Size
Choose a rail about twice your door's width, so the door can slide fully open and clear the doorway.
| Rail | Length | Max Door Width | Wall Space Needed |
|---|---|---|---|
| 5ft | 60" | — | — |
| 5ft 5in | 65" | — | — |
| 6ft | 72" | — | — |
| 6ft 7in | 78.75" (79") | 40" | — |
| 7ft | 84" | — | — |
| 8ft | 96" | — | — |
| 9ft | 108" | — | — |
| 6ft Double (Light Gold) | 72" | — | — |
| 8ft 2in Double (Light Gold, Dark Gold) | 98" | — | — |
| 12ft Double (Dark Gold) | 144" | — | — |
| 13ft Double (Dark Gold) | 156" | — | — |
Contact us for exact sizing.
You'll need clear wall beside the doorway for the door to slide into.
Step 2
Check Your Height
- Above The Opening
- At least 5" between the ceiling and the top of the rail
- Door Thickness
- 1 3/8" or 1 3/4"
Step 3
Check The Weight
- Max Door Weight
- Up to 220 lb
Solid metal hardware, never hollow, built to carry a full-size door.
Step 4
Single Or Double Door
Hanging two doors that meet in the middle? Shop The Double Door Kit in 6ft, 8ft 2in, 12ft or 13ft.
All kits are hardware only. The door is not included.
Barn Door Hardware Kit | Single Door | Gold
How To Measure
Single, Double Or Bypass
Single Door Or Double Door
"Single" sizes hang one door on one track. The Double Door Kit (6ft, 8ft 2in, 12ft or 13ft) hangs two doors on one track that meet in the middle.Bypass
Two doors on two parallel tracks that slide past each other, for wide closets. Sold separately.Questions About This Kit
Choose a track about twice your door width so the door can slide fully clear of the opening, and make sure there is that much open wall beside it. The 6ft 7in (78.75") track fits doors up to 40" wide.
1 3/8" or 1 3/4".
At least 5" between the ceiling and the top of the rail. If the doorway has trim, mount the track on a header board as thick as the trim.
Up to 220 lb.
Track Kit Only: the track, two hangers with rollers, door stops, all mounting hardware and step-by-step instructions. Track Kit + Handle & Floor Guide adds a 12" x 1" pull bar, an 8.5" x 2.3" flush finger pull with screws, pads and a wrench, and a wall-mounted floor guide. The door is not included.
Yes. Step-by-step instructions and all mounting hardware are included. The track sections join seamlessly with the included connector screws. Screw the track into wall studs, or into a header board screwed into the studs. The floor guide mounts to the wall, so there is no groove in the door and no drilling into the floor.
Solid, heavyweight metal, never hollow, with a brushed gold finish. For indoor use only.
The rollers are built to glide quietly along the track. Soft close:
Free Shipping On All Barn Door Hardware, Fulfilled by Amazon. Returns are accepted within 30 days of delivery for unused, uninstalled items in their original packaging, and the customer pays return shipping. Email molly@riosalto.com with your order number before sending anything back. Full return policy.